Proper Installation and Configuration of SolaX Inverters

Introduction

This guide provides detailed instructions to help you properly install and configure your SolaX inverter, ensuring optimal performance and compliance with safety standards.

Prerequisites

Before starting, ensure you have all necessary tools and materials, and have read the relevant product manuals specific to your SolaX inverter model.

Installation Steps

Follow these steps carefully to install your SolaX inverter:

1. Select a suitable mounting location complying with your local electrical codes and the inverter’s environmental requirements.
2. Securely mount the inverter onto the wall or mounting bracket, ensuring proper ventilation clearance.
3. Connect the DC input from your solar panels to the inverter’s DC terminals, observing correct polarity.
4. Connect the battery system to the designated battery terminals, ensuring compatibility and proper connection.
5. Complete the AC output wiring according to local grid regulations and electrical standards.
6. Set up the communication wiring (such as Wi-Fi, Ethernet, or RS485) for remote monitoring and control.

Configuration and Verification

After installation, configure the inverter parameters using the LCD screen or the SolaX monitoring software as follows:

1. Power on the inverter and navigate to the setup menu to input system-specific settings such as grid type, battery parameters, and load management options.
2. Verify the communication settings to ensure that the inverter successfully connects to the SolaX Cloud platform for monitoring.
3. Perform system checks to confirm proper operation and check for any error messages.

Invoice Submission for New Installations

When submitting your invoice for a new inverter installation, please provide the following pictures for verification:

• Clear photo of the inverter’s serial number.
• Photo of the inverter’s operating screen showing system status.
• Photo of the full installation, including wiring and mounting, to demonstrate compliance with installation standards.

Tips and Best Practices

• Always follow local electrical codes and safety standards during installation.
• Use a qualified electrician or certified professional for electrical connections.
• Keep the inverter firmware updated to the latest version for optimal performance.
• Regularly monitor system performance using the SolaX Cloud or mobile app.

Additional Resources

For more detailed instructions, refer to the specific user manual for your SolaX inverter model or visit the SolaX Power Support Center at support.solaxpower.com.

Contact Support

If you encounter any difficulties during installation or configuration, please contact SolaX Power Technical Support for assistance via [Insert contact method: phone number, email, or online portal].

Conclusion

Proper installation and configuration of your SolaX inverter are crucial for ensuring the safety, reliability, and efficiency of your solar energy system. We appreciate your investment in sustainable technology and encourage you to reach out if you need further assistance.