Parallel Inverter System Setup and Dongle Management Guide

Introduction

This guide provides detailed instructions for setting up a parallel inverter system using SolaX Power inverters and managing the communication dongles correctly. Following these steps ensures optimal performance and reliability in your solar energy system.

Prerequisites

Before beginning the parallel system setup, ensure you have:

• Multiple compatible SolaX inverters intended for parallel configuration.
• A communication dongle for each inverter, to enable monitoring and control.
• Access to the official SolaX Power parallel system manual or installation guide.

Step-by-Step Setup Instructions

Follow these steps carefully to complete the parallel system installation and dongle management:

1. Place one communication dongle at each inverter location within the system; maintaining one dongle per inverter is critical for proper communication.
2. Connect each dongle to its corresponding inverter following the manufacturer's connection procedures as detailed in the SolaX Power manual.
3. Consult the parallel system setup section of the manual to configure inverters in the correct sequence and parallel mode.
4. Ensure terminal resistors are enabled on the first and last inverter units in the communication chain. This step is essential to stabilize data transmission and prevent signal reflections.
5. Double-check all inverter and dongle connections, and verify communication settings are properly configured on all devices.
6. Power on the system and monitor the status on each inverter's display or via the SolaX Cloud platform to confirm successful parallel operation and communication.

Tips and Best Practices

• Keep both communication dongles securely on-site to facilitate troubleshooting and future maintenance without delay.
• Refer to the latest SolaX Power firmware updates and manuals to ensure compatibility and optimal system performance.
• If unsure about any setup step, consult SolaX Power technical support or a certified installer to avoid configuration errors.

Additional Resources

For more detailed information, troubleshooting guides, and support, visit the official SolaX Power support website or access the user manual at [Insert link to SolaX Power parallel system manual].

Contact Support

If you encounter issues during the setup or require assistance, contact SolaX Power technical support at [Insert local support contact information]. Our team is ready to help you achieve a reliable and efficient solar energy system.